As we have learned, efficient extraction of oils and gas, in many cases, but not all, require the use of proppants. The most common proppant available in the US is sand.
We can certainly draw similarities between the US construction sand market and the Australian market. The majority of large construction based infrastructure projects have finished or are nearing completion in all states of Australia, whilst commercial and industrial building approvals are subdued. Right now operators and asset owners are looking for alternative markets in order to maintain viable investments.
Similarly, in Australia large scale investment in Gas exploration is yielding a string of potential deposits that may well dwarf anything we have seen before in terms of operational scale and lifecycle.
The drivers for the expansion in Gas exploration and extraction in Australia again are analogous with the US experience. Amongst those drivers is the substantial reduction in CO2 offered by switching to Gas fired power stations and Steel Mills as opposed to Coal fired.
This is important not only in our own country but for many of our global customers as air quality and climate change start to impact populations. In addition to this many of our international resource customers are keen to ensure they have diversified sources of energy. Finally, technology has improved substantially which now enables more economical recovery of the various forms of this energy resource.
One such method of more efficient and effective extraction is the process of Hydraulic Fracturing or Fracking. Whilst this process has been used in Australia for many years it has been limited to certain deposits. With the expansion of horizontal drilling and fracturing of unconventional gas wells the trend toward an explosive demand for Proppants is evident.
The clear opportunity and also the challenge for sand producers and asset owners will be to determine their own capacity to exploit this burgeoning market. At first blush it would seem demand and supply may, for once be in equilibrium, with a strong potential demand and the earth’s crust being most commonly made up of Silica sand, the most common Proppant in use today. However the quality of Proppant demanded is often only able to be met by combining the natural attributes of the deposit such as sphericity and strength, with very effective processing to deliver tightly graded sizing and low turbidity.
Companies with many decades of experience in manipulating high silica sands are well positioned to add Proppant production to their existing operations for greater diversity and increased sales. This being said, the experience so far suggests that up to 50% of sand based proppants were supplied by newly established or non-traditional sand based Proppant suppliers. This has been possible through leveraging the experience and knowledge of specialist suppliers like McLanahan Corporation.
One of the benefits of working in the mining and minerals industry as well as the aggregates and sand industry for over 178 years, is how both industries have had to change production methodologies and business practices as the markets, supply chains and source material shifts over time. McLanahan’s Frac sand specialists were borne out of the mineral sand and recipe sand industries where the markets have traditionally required a high level of product consistency.
According to McLanahan’s Director of aggregate processing division John Best, the first step for most would-be frac sand producers is accurately assessing the quality of the deposit that will make up the base load for frac sand production. Following this we then set about designing a system that enables the producer to match the specification(s) demanded by the specific market or markets.
To reach the final specification an end to end production facility would incorporate the wet processing plant to produce the base load frac sand product followed by the dry plant for drying and polishing to deliver final size fractions as specified by customers.
It is not always necessary to have both facilities in the same location as indeed many suppliers may have wet processing plants close to the raw material deposit whilst the dry plant maybe located closer to the well or e bulk transport hub which is similar to concrete and asphalt batching plants.
Flexibility of design is often an important requirement as producers try to maximise the yield of each deposit by producing product for traditional markets as well as for supply for Proppants for the gas and oil industry. McLanahan Corporation incorporates Modular design and in some cases mobile options to assist in providing ” Plug and Produce” systems.
Whilst the potential offered by this emerging market is enticing, many of our existing customers have taken a cautious approach to changing their process to meet these demands. Traditional suppliers to the construction market have targeted specific deposits or specific grades of an existing deposit to process for the production of natural proppants. For other customers we have developed a purpose built operation suited to the deposit and the range of grades required by local and overseas resource companies.
Whatever the approach we must start by reviewing the deposit to determine what nature has offered as a base resource. If the base resource has promise anything is possible.